Why Flusher2?
Flusher2 is the only Sewer Cleansing solution that improves hydraulic efficiency over a significant distance. Hydraulic modelling demonstrates improvement measured in kilometres, not single pipe lengths.
Enabling Flusher2 to mobilise sediment and prevent blockages only where required, transporting it efficiently to an optimal location for removal.
Drain conditions that promote surface water & sewer flooding
- Poorly maintained gullies or gulley channels.
- Blocked feeder pipes or lateral branches preventing an effective discharge into the carrier drains.
- Disposal of fats, oils & greases (FOG) into the sewer network can lead to fat burgs that can severely restrict flows by up to 80%
- Poorly maintained Catchpits, where the sump is already full of sediment and subsequent sedimentation settles within the highway drain instead, resulting in under performance.
- The presence of defects such as broken pipes, displaced joints, intruding connections or physical obstructions that prevent the effective passage of flow.
- A general lack of programmed maintenance most commonly within areas where access is difficult to provide and results in significant disruption of vital transportation networks
Can automated cleansing provide a permanent preventative solution?
Repeat cleansing is performed during every rainfall event providing a series of cleansing flushes that remove sedimentation over significant distances.
The capabilities delivered by Flusher2 allow Catchpits to be fitted with by-pass sleeves, improving the overall efficiency of the catchment and reducing the need for catchpit maintenance
For a solution so simple, the benefits are incredible
Flusher2 is a simple attenuation and hydraulic acceleration device that is designed to clean drains and sewers continuously. This can be used to deliver significant benefits for any catchment.
Flusher2’s unique push-fit systems can be installed literally in minutes. Positioned either upstream or downstream of any area prone to flooding. It will transform under performing catchments immediately. Its ability to operate over significant distances maximizes its potential benefit even further.
The capability Flusher2 provides to slow the progress of high intensity rainfall and effectively utilize underused capacity within the upper extents of each individual catchment area, reduces flooding in low lying flood risk areas. The ability to introduce additional on-line tank-storage controlled by Flusher2 increases these flood prevention opportunities even further.
Flusher2 is a simple attenuation and hydraulic acceleration device that is designed to clean drains and sewers continuously. This can be used to deliver significant benefits for any catchment
Flusher2s unique push-fit systems can be installed literally in minutes. Positioned either upstream or downstream of any area prone to flooding. It will transform under performing catchments immediately. Its ability to operate over significant distances maximizes its potential benefit even further.
The capability Flusher2 provides to slow the progress of high intensity rainfall and effectively utilize underused capacity within the upper extents of each individual catchment area, reduces flooding in low lying flood risk areas. The ability to introduce additional on-line tank-storage controlled by Flusher2 increases these flood prevention opportunities even further.
Flusher2 alleviates hydraulic problems such as backfalls or bellies
Differential settlement over time, or poor workmanship during installation can easily result in pipes with negative gradients, or with bellies that adversely affect hydraulic performance.
Flusher2 can be used to alleviate these problems, avoiding the cost and disruption of replacing defective infrastructure. The ability to extend the operational life of otherwise failing infrastructure adds considerably to Flusher2’s overall capabilities
